Device Setup Guide

Overview

This document provides detailed step-by-step instructions for setting up devices for the Hipfinity applications. Each section is dedicated to a specific device, including connection guidelines and visual references to ensure a seamless setup process.

WizarPOS Terminal

Supported Models

• Q2
• Q3
• Q2 Premium

Q2

Connecting the Device

The device (Card Reader or Printer) is connected automatically after successfully registering with the Hipfinity application on the WizarPOS terminal. If the device is not connected or the RKI process does not complete automatically, follow these steps:

1. Open Equipment Set Up:
   • Open the app on the WizarPOS terminal.
   • Navigate to Configuration > Set Up Options > Equipment Set Up.
2. Connecting the Device:
   • If the card reader or printer is not connected, the system will display Peripheral Device Not Configured.
   • Tap Card Reader or Printer to begin the connection process.
   • You will be prompted to Choose Device Type.
3. Reconnecting an Existing Device (If Necessary):
   • If the device (Card Reader or Printer) is already connected but not functioning as expected, you must reconnect it.
   • Tap Card Reader or Printer, and a dialog box will appear stating, Device already connected! Do you want to remove this device?
   • Select OK to disconnect the device.
   • Tap Card Reader or Printer again to restart the connection process.
   • You will be prompted to Choose Device Type.
4. Select Connection Type:
   • You will see a dialog box asking you to select the connection type:
     • Bluetooth
     • USB
     • Local
   • Select Local to establish a local connection.
5. Remote Key Injection (RKI):
   • The Remote Key Injection (RKI) process is initiated automatically (once only), during the first successful connection of the device (Card Reader or Printer).
   • To Perform RKI Manually:
     • Navigate to the Equipment Set Up screen.
     • Tap the three dots menu in the top-right corner of the screen.
     • Select Perform RKI from the dropdown menu.

Q3

Connecting the Device

The device (Card Reader or Printer) is connected automatically after successfully registering with the Hipfinity application on the WizarPOS terminal. If the device is not connected or the RKI process does not complete automatically, follow these steps:

1. Open Equipment Set Up:
   • Open the app on the WizarPOS terminal.
   • Navigate to Configuration > Set Up Options > Equipment Set Up.
2. Connecting the Device:
   • If the card reader or printer is not connected, the system will display Peripheral Device Not Configured.
   • Tap Card Reader or Printer to begin the connection process.
   • You will be prompted to Choose Device Type.
3. Reconnecting an Existing Device (If Necessary):
   • If the device (Card Reader or Printer) is already connected but not functioning as expected, you must reconnect it.
   • Tap Card Reader or Printer, and a dialog box will appear stating, Device already connected! Do you want to remove this device?
   • Select OK to disconnect the device.
   • Tap Card Reader or Printer again to restart the connection process.
   • You will be prompted to Choose Device Type.
4. Select Connection Type:
   • You will see a dialog box asking you to select the connection type:
     • Bluetooth
     • USB
     • Local
   • Select Local to establish a local connection.
5. Remote Key Injection (RKI):
   • The Remote Key Injection (RKI) process is initiated automatically (once only), during the first successful connection of the device (Card Reader or Printer).
   • To Perform RKI Manually:
     • Navigate to the Equipment Set Up screen.
     • Tap the three dots menu in the top-right corner of the screen.
     • Select Perform RKI from the dropdown menu.

Q2 Premium

Connecting the Device

The device (Card Reader or Printer) is connected automatically after successfully registering with the Hipfinity application on the WizarPOS terminal. If the device is not connected or the RKI process does not complete automatically, follow these steps:

1. Open Equipment Set Up:
   • Open the app on the WizarPOS terminal.
   • Navigate to Configuration > Set Up Options > Equipment Set Up.
2. Connecting the Device:
   • If the card reader or printer is not connected, the system will display Peripheral Device Not Configured.
   • Tap Card Reader or Printer to begin the connection process.
   • You will be prompted to Choose Device Type.
3. Reconnecting an Existing Device (If Necessary):
   • If the device (Card Reader or Printer) is already connected but not functioning as expected, you must reconnect it.
   • Tap Card Reader or Printer, and a dialog box will appear stating, Device already connected! Do you want to remove this device?
   • Select OK to disconnect the device.
   • Tap Card Reader or Printer again to restart the connection process.
   • You will be prompted to Choose Device Type.
4. Select Connection Type:
   • You will see a dialog box asking you to select the connection type:
     • Bluetooth
     • USB
     • Local
   • Select Local to establish a local connection.
5. Remote Key Injection (RKI):
   • The Remote Key Injection (RKI) process is initiated automatically (once only), during the first successful connection of the device (Card Reader or Printer).
   • To Perform RKI Manually:
     • Navigate to the Equipment Set Up screen.
     • Tap the three dots menu in the top-right corner of the screen.
     • Select Perform RKI from the dropdown menu.

Miura Devices

Supported Models

• PTS3
• PTS5

PTS3

1. Bluetooth Pairing:
   • Power on the PTS3 device by pressing the power button. Bluetooth will be enabled automatically.
     
   • To initiate pairing mode, press and hold the Bluetooth pairing button for 5 seconds until it starts blinking rapidly.
     
   • On your Android phone, go to Settings > Bluetooth.
   • Locate and select the PTS3 device in the available devices list.
   • Press the green tick mark button (as shown in the image below) on the PTS3 device to complete the pairing process.
     
2. App Configuration:
   • Open the Hipfinity app on your phone.
   • Navigate to Configuration > Set Up Options > Equipment Set Up.
   • If the card reader is not configured, it will display Peripheral Device Not Configured. Tap Card Reader, and you will be prompted to Choose Device Type.
   • You will see a dialog box asking you to select the connection type:
     • Bluetooth
     • USB
     • Local
   • Select Bluetooth to connect the card reader.
3. Connecting the Device:
   • The app displays a list of Bluetooth devices.
   • Once the card reader is found, select it from the list, and it will begin the connection process.
   • You will see a Connecting Device prompt while the device is being connected.
4. Remote Key Injection (RKI):
   • The Remote Key Injection (RKI) process is initiated automatically (once only), during the first successful connection of the device.
   • To Perform RKI Manually:
     • Navigate to the Equipment Set Up screen.
     • Tap the three dots menu in the top-right corner of the screen.
     • Select Perform RKI from the dropdown menu.

PTS5

1. Bluetooth Pairing:
   • Power on the PTS5 device by pressing the power button. Bluetooth will be enabled automatically.
     
   • To initiate pairing mode, press and hold the Bluetooth pairing button for 5 seconds until it starts blinking rapidly.
     
   • On your Android phone, go to Settings > Bluetooth.
   • Locate and select the PTS3 device in the available devices list.
   • Press the green tick mark button (as shown in the image below) on the PTS3 device to complete the pairing process.
     
2. App Configuration:
   • Open the Hipfinity app on your phone.
   • Navigate to Configuration > Set Up Options > Equipment Set Up.
   • If the card reader is not configured, it will display Peripheral Device Not Configured. Tap Card Reader, and you will be prompted to Choose Device Type.
   • You will see a dialog box asking you to select the connection type:
     • Bluetooth
     • USB
     • Local
   • Select Bluetooth to connect the card reader.
3. Connecting the Device:
   • The app displays a list of Bluetooth devices.
   • Once the card reader is found, select it from the list, and it will begin the connection process.
   • You will see a Connecting Device prompt while the device is being connected.
4. Remote Key Injection (RKI):
   • The Remote Key Injection (RKI) process is initiated automatically (once only), during the first successful connection of the device.
   • To Perform RKI Manually:
     • Navigate to the Equipment Set Up screen.
     • Tap the three dots menu in the top-right corner of the screen.
     • Select Perform RKI from the dropdown menu.

Datecs Devices

Supported Models

• BluePad 50 Plus
• BlueLite v2
• BlueLite v4
• BlueCash 50
• BluePad 5500 Plus

BluePad 50 Plus

Bluetooth Connection

1. Pair the Device:
   • Power on the BluePad 50 Plus device by pressing the power button. Bluetooth will be enabled automatically.
     
   • Go to Settings > Bluetooth on your Android phone.
   • Select the BluePad 50 Plus device from the available devices list.
   • Press the green tick mark button (as shown in the image below) on the BluePad 50 Plus device to complete the pairing process.
     
2. Configure in App:
   • Open the Hipfinity app on your phone.
   • Navigate to Configuration > Set Up Options > Equipment Set Up.
   • If the card reader is not configured, it will display Peripheral Device Not Configured. Tap Card Reader, and you will be prompted to Choose Device Type.
   • You will see a dialog box asking you to select the connection type:
     • Bluetooth
     • USB
     • Local
   • Select Bluetooth to connect the card reader.
3. Connecting the Device:
   • The app displays a list of Bluetooth devices.
   • Once the card reader is found, select it from the list, and it will begin the connection process.
   • You will see a Connecting Device prompt while the device is being connected.
4. Remote Key Injection (RKI):
   • The Remote Key Injection (RKI) process is initiated automatically (once only), during the first successful connection of the device.
   • To Perform RKI Manually:
     • Navigate to the Equipment Set Up screen.
     • Tap the three dots menu in the top-right corner of the screen.
     • Select Perform RKI from the dropdown menu.

USB Connection

1. Connect via USB:
   • Use a compatible USB cable to connect the BluePad 50 Plus device to your Android phone.
   • Ensure the device is powered on.
2. App Configuration:
   • Open the Hipfinity app on your phone.
   • Navigate to Configuration > Set Up Options > Equipment Set Up.
   • If the card reader is not configured, it will display Peripheral Device Not Configured. Tap Card Reader, and you will be prompted to Choose Device Type.
   • You will see a dialog box asking you to select the connection type:
     • Bluetooth
     • USB
     • Local
   • Select USB to connect the card reader.
3. Connecting the Device:
   • The app displays PinPad in the device list.
   • Select PinPad from the list to start the connection process.
   • You will see a Connecting Device prompt while the device is being connected.
4. Remote Key Injection (RKI):
   • The Remote Key Injection (RKI) process is initiated automatically (once only), during the first successful connection of the device.
   • To Perform RKI Manually:
     • Navigate to the Equipment Set Up screen.
     • Tap the three dots menu in the top-right corner of the screen.
     • Select Perform RKI from the dropdown menu.

BlueLite v2

Bluetooth Connection

1. Pair the Device:
   • Power on the BlueLite v2 device by pressing the power button. Bluetooth will be enabled automatically.
     
   • Go to Settings > Bluetooth on your Android phone.
   • Select the Datecs device from the available devices list.
   • Four white LEDs will blink rapidly after selecting the device from the phone.
   • Press the pairing button (as shown in the image below) on the BlueLite v2 device to complete the pairing process.
     
2. Configure in App:
   • Open the Hipfinity app on your phone.
   • Navigate to Configuration > Set Up Options > Equipment Set Up.
   • If the card reader is not configured, it will display Peripheral Device Not Configured. Tap Card Reader, and you will be prompted to Choose Device Type.
   • You will see a dialog box asking you to select the connection type:
     • Bluetooth
     • USB
     • Local
   • Select Bluetooth to connect the card reader.
3. Connecting the Device:
   • The app displays a list of Bluetooth devices.
   • Once the card reader is found, select it from the list, and it will begin the connection process.
   • You will see a Connecting Device prompt while the device is being connected.
4. Remote Key Injection:
   • The Remote Key Injection (RKI) process is initiated automatically (once only), during the first successful connection of the device.
   • To Perform RKI Manually:
     • Navigate to the Equipment Set Up screen.
     • Tap the three dots menu in the top-right corner of the screen.
     • Select Perform RKI from the dropdown menu.

USB Connection

1. Connect via USB:
   • Use a compatible USB cable to connect the BlueLite v2 device to your Android phone.
   • Ensure the device is powered on.
2. App Configuration:
   • Open the Hipfinity app on your phone.
   • Navigate to Configuration> Set Up Options > Equipment Set Up.
   • If the card reader is not configured, it will display Peripheral Device Not Configured. Tap Card Reader, and you will be prompted to Choose Device Type.
   • You will see a dialog box asking you to select the connection type:
     • Bluetooth
     • USB
     • Local
   • Select USB to connect the card reader.
3. Connecting the Device:
   • The app displays PinPad in the device list.
   • Select PinPad from the list to start the connection process.
   • You will see a Connecting Device prompt while the device is being connected.
4. Remote Key Injection:
   • The Remote Key Injection (RKI) process is initiated automatically (once only), during the first successful connection of the device.
   • To Perform RKI Manually:
     • Navigate to the Equipment Set Up screen.
     • Tap the three dots menu in the top-right corner of the screen.
     • Select Perform RKI from the dropdown menu.

BlueLite v4

Bluetooth Connection

1. Pair the Device:
   • Power on the BlueLite v4 device by pressing the power button. Bluetooth will be enabled automatically.
     
   • Go to Settings > Bluetooth on your Android phone.
   • Select the Datecs device from the available devices list.
   • Four white LEDs will blink rapidly after selecting the device from the phone.
   • Press the pairing button (as shown in the image below) on the BlueLite v4 device to complete the pairing process.
     
2. Configure in App:
   • Open the Hipfinity app on your phone.
   • Navigate to Configuration> Set Up Options > Equipment Set Up.
   • If the card reader is not configured, it will display Peripheral Device Not Configured. Tap Card Reader, and you will be prompted to Choose Device Type.
   • You will see a dialog box asking you to select the connection type:
     • Bluetooth
     • USB
     • Local
   • Select Bluetooth to connect the card reader.
3. Connecting the Device:
   • The app displays a list of Bluetooth devices.
   • Once the card reader is found, select it from the list, and it will begin the connection process.
   • You will see a Connecting Device prompt while the device is being connected.
4. Remote Key Injection:
   • The Remote Key Injection (RKI) process is initiated automatically (once only), during the first successful connection of the device.
   • To Perform RKI Manually:
     • Navigate to the Equipment Set Up screen.
     • Tap the three dots menu in the top-right corner of the screen.
     • Select Perform RKI from the dropdown menu.

USB Connection

1. Connect via USB:
   • Use a compatible USB cable to connect the BlueLite v4 device to your Android phone.
   • Ensure the device is powered on.
2. App Configuration:
   • Open the Hipfinity app on your phone.
   • Navigate to Configuration> Set Up Options > Equipment Set Up.
   • If the card reader is not configured, it will display Peripheral Device Not Configured. Tap Card Reader, and you will be prompted to Choose Device Type.
   • You will see a dialog box asking you to select the connection type:
     • Bluetooth
     • USB
     • Local
   • Select USB to connect the card reader.
3. Connecting the Device:
   • The app displays PinPad in the device list.
   • Select PinPad from the list to start the connection process.
   • You will see a Connecting Device prompt while the device is being connected.
4. Remote Key Injection:
   • The Remote Key Injection (RKI) process is initiated automatically (once only), during the first successful connection of the device.
   • To Perform RKI Manually:
     • Navigate to the Equipment Set Up screen.
     • Tap the three dots menu in the top-right corner of the screen.
     • Select Perform RKI from the dropdown menu.

BlueCash 50

1. Local Connection Setup:
   • Ensure the BlueCash 50 is powered on.
2. Connecting Terminal Devices:
   • Open the Hipfinity app on BlueCash 50.
   • Navigate to Configuration> Set Up Options > Equipment Set Up.
   • If the card reader is not configured, it will display Peripheral Device Not Configured. Tap Card Reader, and you will be prompted to Choose Device Type.
   • You will see a dialog box asking you to select the connection type:
     • Bluetooth
     • USB
     • Local
   • Select Local to connect the device locally.
3. Remote Key Injection (RKI):
   • The Remote Key Injection (RKI) process is initiated automatically (once only), during the first successful connection of the device.
   • To Perform RKI Manually:
     • Navigate to the Equipment Set Up screen.
     • Tap the three dots menu in the top-right corner of the screen.
     • Select Perform RKI from the dropdown menu.

BluePad 5500 Plus

1. Local Connection Setup:
   • Ensure the BluePad 5500 Plus is powered on.
2. Connecting Terminal Devices:
   • Open the Hipfinity app on BluePad-5500 Plus.
   • Navigate to Configuration> Set Up Options > Equipment Set Up.
   • If the card reader is not configured, it will display Peripheral Device Not Configured. Tap Card Reader, and you will be prompted to Choose Device Type.
   • You will see a dialog box asking you to select the connection type:
     • Bluetooth
     • USB
     • Local
   • Select Local to connect the device locally.
3. Remote Key Injection (RKI):
   • The Remote Key Injection (RKI) process is initiated automatically (once only), during the first successful connection of the device.
   • To Perform RKI Manually:
     • Navigate to the Equipment Set Up screen.
     • Tap the three dots menu in the top-right corner of the screen.
     • Select Perform RKI from the dropdown menu.

IDTECH Devices

VP3300

1. USB Connection:
   • Use a micro-USB to Type-C cable to connect the VP3300 device to your phone.
   • Ensure the device is powered on.
2. App Configuration:
   • Open the Hipfinity app on your phone.
   • Navigate to Configuration> Set Up Options > Equipment Set Up.
   • If the card reader is not configured, it will display Peripheral Device Not Configured. Tap Card Reader, and you will be prompted to Choose Device Type.
   • You will see a dialog box asking you to select the connection type:
     • Bluetooth
     • USB
     • Local
   • Select USB to connect the card reader.
3. Connecting the Device:
   • The app displays VP3300 USB in the device list.
   • Select VP3300 USB from the list to start the connection process.
   • You will see a Connecting Device prompt while the device is being connected.
4. Remote Key Injection (RKI):
   • The Remote Key Injection (RKI) process is initiated automatically (once only), during the first successful connection of the device.
   • To Perform RKI Manually:
     • Navigate to the Equipment Set Up screen.
     • Tap the three dots menu in the top-right corner of the screen.
     • Select Perform RKI from the dropdown menu.